EoC Ethernet Over Coaxial Device, 1 BNC + 4 RJ45 with POE Function

Model Number: NT-EN1400-M#1-#9845 Brand Name: N-net Key Specifications/Special Features: Device for Ethernet transmission over coax featuring coax to UTP connectivity, equipped with one Ethernet port and four BNC ports, which can make a ring or aggregationSo it can be used in pair or one to multipleEquipment can transmit signal over all kinds of common cables such as telephone line, Ethernet cable, UTPWith excellent isolation, thunder prevention and anti-jamming functionIn the practical project, this device is proved to be of high performance in surge prevention

It transmits IP video or Ethernet up to 1.5km at a max rate 70Mbps over existing coax, thus cut the cost by avoid re-cabling when swapping analog cameras for IP/Megapixel models

NT-EN1400-AT (AF) series is POE version of model NT-EN1400, it can supply power over Ethernet cable for PD devices like HD cameras, wireless AP, IP telephone equipment

Our EOC supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W) standard

NT-EN1400-AT (AF) series also supports POC (power over coax) function

Model at local side (namely the master) can supply power over coax cable for the model at remote side (the slave) and IP cameras

Modulation frequency: 2 MHz-28 MHz

Modulation method: OFDM

Encryption: AES128-bit encryption

Networking: one master and 7 slaves

Protocol: IEEE802.3/u 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at

Supports auto-sensation of MDI/MDIX at Ethernet port, compatible with NIC, switch and HUB

Supports up to 1522 bytes data packet

Supports store and forward working mode, back pressure on half-duplex and flow control full-duplex

Power supply range: 12 to 56V

-70℃

Supports Ethernet ESD protection and EFT

POE (15.4W) and POE+ (25.5W) supported (optional)